Huggett ½″ UNF female

The vast majority of barrels are ½″ UNF male, requiring a ½″ UNF female connector. Huggett Connectors come in two styles for you to choose from, according to your personal preference:

Tapered

The Huggett ½″ UNF female tapered connector, 31mm diameter, with high quality matching finish, and below seen fitted to a Huggett Snipe S1 moderator.

Flat

The Huggett ½″ UNF female flat connector, 31mm diameter, with high quality matching finish, and below seen fitted to a Huggett Snipe S1 moderator.

Flat connector
(Magna-size)

The Huggett ½″ UNF female flat connector, 40mm diameter, with high quality matching finish, and here seen fitted to a Huggett Magna S1 moderator.

There is as yet no tapered connector available for the Magna.

Huggett ½″ UNF male

Tapered

The Huggett ½″ UNF male tapered connector, with high quality matching finish, and below seen fitted to a Huggett Snipe S1 moderator.

Flat

The Huggett ½″ UNF male flat connector, with high quality matching finish, and below seen fitted to a Huggett Snipe S1 moderator.

Huggett Connector for AGN Vulcan

   

M14×1.25

This connector allows any 31mm Huggett silencer to be fitted to an Airgun Technolgy Vulcan with an M14×1.25 thread.

Huggett Connector for AirArms

   

Slip-on connector for AirArms S400 & S410

The AirArms S400 & S410 have no barrel threads for attachments, and there is limited clearance between barrel and PCP cylinder. This special Hugget connector is designed solely to enable you to connect a Hugget Atom, Belita or Snipe moderator to your AirArms S400 or S410.

Here you see it fitted to a Huggett Snipe S1 moderator ...

Huggett connectors for FX Airguns

   

The majority of FX airguns are supplied with a pre-fitted M20x1 shroud (Metric thread 20mm diameter × 1mm thread pitch). Some are male, some are female. Here you can find a purpose-built connector to fit any Huggett moderator to your FX Airguns own-brand shroud.

You may choose to remove your FX Airguns own-brand shroud and replace it with a Huggett shroud designed for a perfect fit to FX airguns. The Huggett shrouds for FX contain a built-in moderator.    Go there …

FX M20×1 female

Huggett connector for …

FX Bobcat MkII (Europe)
FX Verminator MkII
FX Wildcat MkII

FX M20×1 female
(Magna-size)

FX Bobcat MkII (Europe)
FX Wildcat MkII

FX M20×1 male

Huggett connector for …

FX Bobcat MkII (USA)
FX Indy
FX Wildcat

FX M20×1 male
(Magna-size)

Huggett connector for …

FX Bobcat MkII (USA)
FX Wildcat

Huggett slip-on connector for 5/8" barrels

Slip-on

This slip-on connector fits 5/8" barrels. It was originally produced for the then UK Theoben Rapid. It is secured by a single stainless steel set screw.